Domyos TC 790 Instructions d'exploitation télécharger pdf (Page 22)

ENGLISH

CARE AND MAINTENANCE

Caution - this product is heavy (>87 kg, or 192 lbs). Before

attempting to move it, make sure that you are big and strong

enough to do so!

The treadmill features wheels for easy moving.

Before moving the machine, make sure that the main switch is in

the "0" position, and that the plug is removed from the power

source.

Lift the frame of the treadmill and move it to the desired location.

Before moving the treadmill or putting it away, make sure that the

left piston is locked.

Pivot the treadmill toward the front to position it on the wheels.

When moving the treadmill, be careful not to damage the electri-

cal cord connected to the treadmill. We advise you to wind it

around a side upright so that it is above the product when you are

moving the treadmill. When you have the treadmill where you

want it, block it with your foot and lower the belt until it is in full

contact with the floor.

Note: after every time the product is moved, it is advisable to

adjust it horizontally before using it again.

Turn the treadmill off using the main switch, and remove the plug from the socket.

Lift the machine with care to put it in a vertical position.

Cleaning:

With your hands, separate the belt from the platform (see diagram on side) and wipe with a

dry cloth to clean the inside of the running belt, advancing it manually. In this way, the whole

surface will get clean.

Lubrication:

With your hands, separate the running belt from the belt platform (see diagram on side). Spray

a light coating of silicone onto the belt while advancing it manually until the whole surface is

completely covered.

Lubricating the treadmill one time requires 5 to 10 ml of silicone. Using too much silicone

would cause the product to malfunction.

Important:

Do not apply the silicone to the running surface.

If the silicone drips over the sides of the treadmill, wipe it off to avoid slipping.

Keep this product away from eyes and mouth, as it is toxic.

Check the lubrication of the belt every 10 hours of use.

Note:

One container of silicone is supplied with the product. For subsequent purchases, go to a sili-

cone spray supplier or contact a Decathlon store.

After spraying the lubricator on, put the treadmill in a horizontal position and let it run for a

few minutes. If the silicone is dripping over the sides of the treadmill, wipe it off to avoid slip-

ping.

If the edges of the running belt are damaged, check its alignment before using it again (see

page 20).

If the seams tear, stop using the machine and contact your Decathlon store.

Note:

For the appropriate silicone fluid, please contact your Decathlon store

MOVING

LUBRICATING THE TREADMILL

1 2 ... 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Domyos TC 790 Instructions d'exploitation Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Tapis de course Domyos TC 790